Raspberry PI VPN

Raspberry PI VPN

Install openvpn

$ sudo apt-get update
$ sudo apt-get update
$ sudo apt-get install openvpn

Adjust /etc/openvpn/server.conf to reflect the local environment, for rapid see

$ vim /etc/openvpn/serverl.conf
 /etc/openvpn/serverl.conf

Routing is required enable this in sys control by changing /etc/openvpn/server.conf and activating it.

$ sudo vim /etc/sysctl.conf
 /etc/sysctl.conf

Activate the change by executing:

$ sudo sysctl -p

Now set the firewall to allow traffic to be routed. First view existing entries in iptables:

$ sudo iptables -L
$ sudo iptables -t nat -L

Enter the iptables rules, for rpi2 this is:

$ sudo iptables -A INPUT -i tun+ -j ACCEPT
$ sudo iptables -A OUTPUT -o tun+ -j ACCEPT
$ sudo iptables -t nat -A POSTROUTING -s 20.172.0.0/24 -o eth0 -j MASQUERADE
$ sudo iptables -I FORWARD -i tun0 -o eth0 -s 20.172.0.0/24 -d 10.0.0.0/24 -m conntrack --ctstate NEW -j ACCEPT
$ sudo iptables -A INPUT -i eth0 -m state --state NEW -p udp --dport 1194 -j ACCEPT
$ sudo iptables -A FORWARD -i tun+ -j ACCEPT
$ sudo iptables -A FORWARD -i tun+ -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT
$ sudo iptables -A FORWARD -i eth0 -o tun+ -m state --state RELATED,ESTABLISHED -j ACCEPT

Check the content:

$ sudo iptables -L
 Chain INPUT (policy ACCEPT)
 target     prot opt source               destination         
 ACCEPT     all  --  anywhere             anywhere            
 ACCEPT     udp  --  anywhere             anywhere             state NEW udp dpt:openvpn
 Chain FORWARD (policy ACCEPT)
 target     prot opt source               destination         
 ACCEPT     all  --  20.172.0.0/24        10.0.0.0/24          ctstate NEW
 ACCEPT     all  --  anywhere             anywhere            
 ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
 ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
 Chain OUTPUT (policy ACCEPT)
 target     prot opt source               destination         
 ACCEPT     all  --  anywhere             anywhere            

Now install iptables-persistent, this will ask to save the existing rules in /etc/iptables/rules.v4, which will then be loaded at startup: sudo apt-get install iptables-persistent If iptables-persistent is already installed, run iptables-save and copy the file to /etc/iptables/rules.v4 sudo iptables-save > rules.v4 sudo cp rules.v4 /etc/iptables/ The content of rules.v4 looks like this for rpi2: /etc/iptables/rules.v4

Now reboot sudo shutdown -h now